Im thinking about getting the comp 224/230 581/592 114 lsa cam for my bolt on 99 camaro, im going this weekend to get a performa built 3400 stall and I just picked up a BBK SSI intake and 80mm tb, I know I will need to upgrade the springs with this cam but could I get away without pushrods and rockers if used on stock 241 heads? what things MUST be done if I upgrade the cam anytime soon , I plan on getting a tune from jeremy F when im done puting it together , any advice?, warnings? , input?

 

You will need hardened push rods. The stock rockers are fine, although many upgrade the trunions.

 

Definitely need hardened push-rods, at least .080 walled.