Turbo Cam for 408 Iron block 6.0L
#1
Teching In
Thread Starter
Join Date: Jan 2002
Location: las vegas
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Turbo Cam for 408 Iron block 6.0L
Hello:
I am going to have a T-76 turbo/kit installed soon and now I am trying to select a good turbo cam for my set up. The car will be driven daily and hopefully produce between 650-750 rwhp on about 15 lbs of boost. The bottom line is that I want this car to be built for street stoplight to stoplight racing and NOT TRACK ONLY. Below is the basic information, any cam suggestions that you have would be greatly appreciated with duration, lift and timing advance included.
2000 M6 TA
408 6.0l iron block stroker
forged internals with 8.5:1 compression pistons
6.0l heads with dual springs
If I've forgotten any important info please let me know.
Thanks a million!!
I am going to have a T-76 turbo/kit installed soon and now I am trying to select a good turbo cam for my set up. The car will be driven daily and hopefully produce between 650-750 rwhp on about 15 lbs of boost. The bottom line is that I want this car to be built for street stoplight to stoplight racing and NOT TRACK ONLY. Below is the basic information, any cam suggestions that you have would be greatly appreciated with duration, lift and timing advance included.
2000 M6 TA
408 6.0l iron block stroker
forged internals with 8.5:1 compression pistons
6.0l heads with dual springs
If I've forgotten any important info please let me know.
Thanks a million!!