Checking pushrod length without installing a solid lifter?
Checking pushrod length without installing a solid lifter? Just wondering how exactly to determine pushrod length without having a solid lifter or removing the heads...
I've read that you can guesstimate by counting how far of a turn only takes to get 22ft/lb after zero lash but was not quite sure. I have looked and searched some but was wanting to be "sure".
Thanks guys.
I've read that you can guesstimate by counting how far of a turn only takes to get 22ft/lb after zero lash but was not quite sure. I have looked and searched some but was wanting to be "sure".
Thanks guys.
TECH Regular
Joined: Jul 2011
Posts: 452
Likes: 2
There's this same question posted about ever other day, and there are quite a few threads on the subject ... here's a couple good ones. 
https://ls1tech.com/forums/generatio...pushrod-q.html
https://ls1tech.com/forums/generatio...questions.html
https://ls1tech.com/forums/generatio...pushrod-q.html
https://ls1tech.com/forums/generatio...questions.html
