HeavyMetl

iTrader: (2)

I really like what I've seen this combo do, its proven and it works.

As it get closer to the time for me to buy heads/cam, I'm torn between this TSP combo, or AI 243's and a custom EPS cam.

Sometimes I think with a 346, we're all too picky...it seems a good set of heads and damn near any camshaft puts everyone within ~20rwhp and similar track times coming down mostly to the car setup and driver ability.

I dunno, I just want to trap 120+ with my '84. Its light..so that'll help.

cranny

Would the PRC stage 2.5 LS6 heads be an improvement over the 5.3 heads?

'02 WS6

iTrader: (73)

When I ran my TV2 TSP recommended I run LS6 heads over the 5.3s due to runner length. For the 5.3 heads I think the MS3 is the best cam they offer for the combo, followed by the TV3. That said, custom cam setup is the best way, but they have plenty of proven combos with their off shelf heads/cam pkg at the click of a mouse that will perform. Good luck!

1stIDFO

iTrader: (1)

Are you heads milled any?

marthastewart

iTrader: (1)

well its getting up and running with injectors at 99%.... what injectors are you guys using? Did you need a fuel pump too?

'02 WS6

iTrader: (73)

Ford red top 30# or Bosch 36# or up to 42# and Racetronix pump.