Tsp 231/237 cam and 799 heads ok?
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
So im finally gonna get into the block. I got a 231/237 112 i bought from a member
here and just toda6 got my hands on some 799 from a dismantler. I plan on getting
them rebuilt/milled thats it. I just cant afford a AI port job right now. As far as tunning im going with a frost mail tune. Think ill hit the 400 rwhp mark? Maybe mid 11's?
I already have bolts-ons minus pulley,ls6intake,3800ptc stall ,mts,323's Lts 2 1/2 tds. Any thoughts?
here and just toda6 got my hands on some 799 from a dismantler. I plan on getting
them rebuilt/milled thats it. I just cant afford a AI port job right now. As far as tunning im going with a frost mail tune. Think ill hit the 400 rwhp mark? Maybe mid 11's?
I already have bolts-ons minus pulley,ls6intake,3800ptc stall ,mts,323's Lts 2 1/2 tds. Any thoughts?
Last edited by a-low; 11-23-2011 at 12:20 AM.
#4
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Got basic weight reduction rear seats ,spare tire and such. As suspension goes got konis
/stranos, lca,relobrackets,adjph. Well 11's for minimal amount of $ aint too bad. The car
does have a cold fusion kit installed but my window switch just took a dump. Havent been
to the track after stall/nitrous install.
/stranos, lca,relobrackets,adjph. Well 11's for minimal amount of $ aint too bad. The car
does have a cold fusion kit installed but my window switch just took a dump. Havent been
to the track after stall/nitrous install.