Abosulte owners inside please
Thread Starter
TECH Apprentice
Joined: May 2002
Posts: 392
Likes: 0
From: Savage, MD
Abosulte owners inside please I been looking at the Abosulte heads(5.3) and I wanted to see what kind of power you guys are putting down with these heads and big cams. Currently I have a TSP 231/237 and put down 401 but since I have a bad lifter I'm going to go with a new cam and heads. Also track times would be nice also.
On The Tree
Joined: Oct 2003
Posts: 128
Likes: 0
AS Stage II 5.7's, tiny TR224, 410 rwhp / 397 rwtq with only exhaust and intake, no other bolt-ons, and stock tuning (air/fuel all over the chart).
Running 7.61's @ 93.5 mph all day long with the stock 3.42 gears in the 10 bolt and my stiff *** auto-x/road race suspension on the car also. Thats 7.61 with a blazing kick in the *** 1.89 60 foot, heh.
Running 7.61's @ 93.5 mph all day long with the stock 3.42 gears in the 10 bolt and my stiff *** auto-x/road race suspension on the car also. Thats 7.61 with a blazing kick in the *** 1.89 60 foot, heh.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo Thread Starter
TECH Apprentice
Joined: May 2002
Posts: 392
Likes: 0
From: Savage, MD
Some great numbers. I was looking at maybe getting the G5x2 with the heads. WHat are the specs on the G5x3 by the way? It's bigger then the X2 right? Or possiblity might go with a custom cam on a 110 LSA.
Originally Posted by Savageite
Some great numbers. I was looking at maybe getting the G5x2 with the heads. WHat are the specs on the G5x3 by the way? It's bigger then the X2 right? Or possiblity might go with a custom cam on a 110 LSA.
Originally Posted by Jammer
I think there are alot of open orders out there...he must be a very busy man.
and i'm ready to
On The Tree
Joined: Jan 2004
Posts: 151
Likes: 0
From: albany, new york
Originally Posted by destroyerSS
Don't say that cause last week i ordered a set of 5.3L stage 2.5 heads
and i'm ready to
and i'm ready to
TECH Resident
Joined: Apr 2003
Posts: 791
Likes: 0
From: Tulsa, Ok
i just got my heads in a couple of weeks ago after waiting for a while. still have a couple of bugs to chase down then it's off to the dyno and track
just be patient guys, you know you're gonna get a good product in the end
just be patient guys, you know you're gonna get a good product in the end
LS1TECH Sponsor
iTrader: (33)
Joined: Jul 2002
Posts: 4,399
Likes: 0
From: Out on the farm in Central IL
I made 435 and 409 with WAY too much preload on the Comp R lifters. I just did HS rockers and set the preload I will need to dyno again. I am expecting north of 450.
Launching!
Joined: Mar 2002
Posts: 223
Likes: 0
From: McKinney Texas
Originally Posted by Steve Burger
I made 435 and 409 with WAY too much preload on the Comp R lifters. I just did HS rockers and set the preload I will need to dyno again. I am expecting north of 450.
thanks,
Crowley
I am really getting impatient and excited at the same time. I talked to Jay this morning and he said his is picking up my heads tomorrow, then off to the machine shop. He says the intakes are taking him alot longer than he thought. I ordered mine around the first week of Feb. But I know it will be well worth it when I get them. Its just we are getting some really nice top down weather 
Still two weeks away I guess.
Still two weeks away I guess.
