What do you guys think about these heads???
#1
Staging Lane
Thread Starter
iTrader: (9)
Join Date: Aug 2011
Location: Hopkinsville, KY
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
http://www.ebay.com/itm/290723245360...ht_1272wt_1163
Like it says just wanting to get some opinions, I'm on a budget and looking to make some more power.
Like it says just wanting to get some opinions, I'm on a budget and looking to make some more power.
#2
TECH Junkie
iTrader: (1)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I've seen these, before.
They were the subject of a similar thread, not too long ago.
Comments ranged from, "you get what you pay for", to, "seems like a good deal".
I'd like to know what components are used, and to dial the tech telephone line, shown at the bottom of the ad.
Maybe an owner of these will see this and chime in......
Edit: I want to add that the photos don't allow you to see the porting. $700 for the pair is $350 apiece. Of the $350, they are including springs, keepers, & valves. The play between the cost of valvetrain, as opposed to the remaining cost for the castings & porting would cause me concern for the overall quality.
They were the subject of a similar thread, not too long ago.
Comments ranged from, "you get what you pay for", to, "seems like a good deal".
I'd like to know what components are used, and to dial the tech telephone line, shown at the bottom of the ad.
Maybe an owner of these will see this and chime in......
Edit: I want to add that the photos don't allow you to see the porting. $700 for the pair is $350 apiece. Of the $350, they are including springs, keepers, & valves. The play between the cost of valvetrain, as opposed to the remaining cost for the castings & porting would cause me concern for the overall quality.
Last edited by gMAG; 08-02-2012 at 06:23 PM.
#4
Staging Lane
Thread Starter
iTrader: (9)
Join Date: Aug 2011
Location: Hopkinsville, KY
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Good point, i asked them about the valve springs and they are just a factory replacement, not rated for any kind of lift if you have a cam. So those would have to be replaced right off the bat.