bwolfZ28

iTrader: (40)

I cant wait to get this cam installed and have everything tuned. I'm thinking about grabbing up a FAST intake here asap and see what this baby can do.

Sales@Tick

iTrader: (3)

Cam is ordered Brian thanks for the business!

jzingre

iTrader: (16)

Martin,

Here ya go. The tshirt would be very cool. Thx. Definitely a loyal Tick customer. I have been working with Joey for years. I have to give my buddy chrs1313 props for helping eek more hp\tq from the previous 463rwhp...

bwolfZ28

iTrader: (40)

Jzingre: what was the compression on that setup?

jzingre

iTrader: (16)

I netted 11.9 to 1 CR by using a thin cometic headgasket and the heads being milled to 57.5cc chambers. I did have to flycut the pistons.

Sales@Tick

iTrader: (3)

Thank you for obliging my offer!

You can call the shop and give us your shipping address and shirt size and we will get one out to ya when the new ones come in!!!

Love it!!! Props to Chris1313 also for sure! He's a bad man!

Here is a bigger picture for those wanting to see jzingre's graph....

20ws601

Low 230 intake high 230 exhaust. 111 lsa and controlable lobes here. 470rwhp on milled 220's with ls3 valves. Should be in that area easily. 11.3:1 comp.

Rise of the Phoenix

iTrader: (27)

That's a lot of HP with a relatively small cam. Cudos to you. Do you know what the max TQ numbers were?

Sales@Tick

iTrader: (3)

TFS heads what more can you say!!!

stryder

iTrader: (3)

That HP is flywheel, the heads are not milled either i have seen that combo make 450 with a ls6 intake on a WS6. fwiw great set up though for sure

20ws601

405rwtq honestly I thought it would be higher since I did put emphasis on tq when getting the cam spec'd for my setup. Although it does come on early and carry fairly well. Its just a street car and its for the most part more than most would ever need/want and drives like stock. For the price of the "as casts" compared to the cnc'd its hard to beat.

bwolfZ28

iTrader: (40)

Well the cam came in today. Not even a week and I had it. Cant say enough good things about Martin@Tick Performance. I have a dyno appt next week. Now I'm just waiting on my heads. They are at the machine shop getting milled now.

Sales@Tick

iTrader: (3)

Thank you so much for the kind words!

We will all be waiting patiently for results!

FWIW this cam is 234/239 .612"/.610" 112+3.

garygnu

TEA has a smaller cam that will make 470rwhp.the EPS 226/234 cam dose 470 rwhp also.vengeance racing vr5 cam can make 470rwhp.

spicebird98

iTrader: (10)

Are those comp lobes Martin? Ive seen a Bret Bauer spec very similar from a few years ago that made huge power

bwolfZ28

iTrader: (40)

The lift on this cam is actually .612/.620

Sales@Tick

iTrader: (3)

Your point?

Yes those are comp lobes. Very nice lobes, controllable and not too bad on springs either.

bwolfZ28

iTrader: (40)

First Start vid:



It's getting dropped off to get tuned tomorrow. Will post results.

Sales@Tick

iTrader: (3)

That thing sounds wicked how do you like the idle is it what you wanted?

spicebird98

iTrader: (10)

very interested in the results, sounds good