Bret Bauer or Ed Curtis?
10-10-2012, 03:51 PM
#22
I like Bret, he put a cam in my buddies 02 Z28 and made 405 to the wheels with a LS6 intake, lid and headers through an M6, wasn't big either low 230's. Car pulled hard all the way through the RPM range.
He did the cam in my LT1 the solid roller and it did more than I expected.
Bret won't baby or coddle you, you call him with what you want(better have your mind made up and all your specs in front of you) and he will spec you a cam......simple.
He did the cam in my LT1 the solid roller and it did more than I expected.
Bret won't baby or coddle you, you call him with what you want(better have your mind made up and all your specs in front of you) and he will spec you a cam......simple.
10-10-2012, 06:53 PM
#25
On The Tree
10-10-2012, 10:13 PM
#27
Teching In
iTrader: (1)
Join Date: Nov 2009
Location: Rochester, NY
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
I dont have any dyno numbers off hand .Im going based off the best.. Mike @ New Era is the closest shop to me and Mike teams up with Ed and builds the baddest cars out their and dosent get half the respect he deserves..You want good results go with a cam Ed suggests and a tuner Ed recommends.
10-13-2012, 02:40 PM
#35
Alot of LS1ers seem to have a fetish with "Donkeydick" cams.Whatever....
