dropedss86

iTrader: (5)

Guys I am changing out my timing chain cover gasket should I replace my Oilpump I have about 50PSI cold and 40 cold at idle and should I change my timing chain or should I just inspect it once I have the cover off. What else should I replace since I will have the front end appart. I have already replaced the PS pump and alt.
TIA

blackbird0230

I think I would if it's never been replaced. Water pump gaskets, coolant, timing chain.
But then again if it ain't broke don't fix it lol. If you do replace pump make sure to replace the o ring

ls1 1990 VN

Depends on how many miles you have done on the gear that's on there. Have you thought about the split timing chain cover as a replacement for the one piece.

Always2Slow

iTrader: (8)

If it were me and digging into the motor like that i would be doing a cam swap and changing all the wear items out for new to freshen the motor up.

arock24

iTrader: (4)

That stall would really like an upgraded cam..

dropedss86

iTrader: (5)

I am scared to cam it with that many miles . and i do not have a lot of $$ to put in to it I am just trying to get her dry. and If I do cam I will need to do lifter springs and push rods