can 98 heads...
#1
TECH Fanatic
Thread Starter
iTrader: (4)
Join Date: Aug 2002
Location: Colorado Springs
Posts: 1,243
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
have the combustion chambers increased from 66.67 to like 70?
my heads are already ARE Stage 2 heads...is this possible?
or should I jess sell these heads...get 6.0 heads and go from there?
my heads are already ARE Stage 2 heads...is this possible?
or should I jess sell these heads...get 6.0 heads and go from there?
#2
TECH Fanatic
iTrader: (3)
Join Date: Jan 2003
Location: miami beach fl
Posts: 1,652
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
To the best of my knowledge there is no way to enlarge you combustin chamber for lower compression. You can mill heads to raise compression, but I cant see how you could un mill them. If you want to keep your heads get some low comp pistons.
#3
TECH Senior Member
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by ta12sec
To the best of my knowledge there is no way to enlarge you combustin chamber for lower compression. You can mill heads to raise compression, but I cant see how you could un mill them. If you want to keep your heads get some low comp pistons.
So I guess that enlarging the bowls is possible, perhaps only to a certain degree.