Ls6 valve springs
Thread Starter
Staging Lane
Joined: Jan 2013
Posts: 86
Likes: 0
From: Minnesota
Ls6 valve springs Will ls6 valve springs work with comp cams 54-426-11???
it is 222/224 .566/.568 112lsa. This is a budget build and pinching pennies where i can so if they will work thats what ill buy.
it is 222/224 .566/.568 112lsa. This is a budget build and pinching pennies where i can so if they will work thats what ill buy.
Thread Starter
Staging Lane
Joined: Jan 2013
Posts: 86
Likes: 0
From: Minnesota
Comp cams recommends using 26918 springs so i think i will go with that. i have been reading that the xfi lobes have pretty fast ramp rates and alot of guys are using double springs but most i see have a more aggresive cam than i will be using
TECH Senior Member
Joined: Mar 2004
Posts: 14,620
Likes: 17
From: BFE
No, LS6 springs will not handle those lobes for an extended period of time. Too sharp of a ramp.
BTW lift capability is not the only thing one has to look at in choosing springs. You have to look at the cam's pressure requirements.
BTW lift capability is not the only thing one has to look at in choosing springs. You have to look at the cam's pressure requirements.
