Cam and springs for 4.8L
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Jun 2006
Location: Columbia, SC
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Cam and springs for 4.8L
I'm looking for a cam and springs for my "cheap as dirt" 4.8L build.
I'm not trying to build a max effort 4.8 or anything like that, just something to play with.
Weight: ~3000lbs
Trans: Camaro WC T-5
Final drive: 3.73
4.8L = stock
Approximate whp: ~300whp
Powerband: 3000-7000 rpm
Rev Limit: 7400
Here are some cams I am looking at:
Dur In/Ex .006 DurIn/Ex .050 Lift In/Ex LSA ICL
269/278 216/224 .551 .551 114 110
268/274 218/224 .604 .612 113 109
271/275 218/224 .604 .604 112 108
267/276 219/228 .525 .525 112 108
Any of the above cams will get me close? Any suggestions on springs? I was looking at PSI 1511ML.
Thx,
-=PJ
I'm not trying to build a max effort 4.8 or anything like that, just something to play with.
Weight: ~3000lbs
Trans: Camaro WC T-5
Final drive: 3.73
4.8L = stock
Approximate whp: ~300whp
Powerband: 3000-7000 rpm
Rev Limit: 7400
Here are some cams I am looking at:
Dur In/Ex .006 DurIn/Ex .050 Lift In/Ex LSA ICL
269/278 216/224 .551 .551 114 110
268/274 218/224 .604 .612 113 109
271/275 218/224 .604 .604 112 108
267/276 219/228 .525 .525 112 108
Any of the above cams will get me close? Any suggestions on springs? I was looking at PSI 1511ML.
Thx,
-=PJ