What springs for RR and crane 224,228 cam?
#1
TECH Fanatic
Thread Starter
What springs for RR and crane 224,228 cam?
HR-224/347-2S-14 4A 2300-
6500
1449111* 144536-16b 224 280 114 0.5 43.5 .000 .590
228 283 50.5 (2.5) .000 .590
Looking at going with a roller rocker on the combo but not sure yet. Harland sharp shaft 1.7's or yt ultra lite's maybe.
Won't be reved past 6500.
Was looking at some of pac's stronger behives that they have but like the idea of dual springs if a breakage occurs. Was looking at what Brian Tooley offers but it looks like it takes alot of spring to control the roller rockers. I would rather have the tool steel retainers also.
What springs?
6500
1449111* 144536-16b 224 280 114 0.5 43.5 .000 .590
228 283 50.5 (2.5) .000 .590
Looking at going with a roller rocker on the combo but not sure yet. Harland sharp shaft 1.7's or yt ultra lite's maybe.
Won't be reved past 6500.
Was looking at some of pac's stronger behives that they have but like the idea of dual springs if a breakage occurs. Was looking at what Brian Tooley offers but it looks like it takes alot of spring to control the roller rockers. I would rather have the tool steel retainers also.
What springs?
#2
TECH Senior Member
HR-224/347-2S-14 4A 2300-
6500
1449111* 144536-16b 224 280 114 0.5 43.5 .000 .590
228 283 50.5 (2.5) .000 .590
Looking at going with a roller rocker on the combo but not sure yet. Harland sharp shaft 1.7's or yt ultra lite's maybe.
Won't be reved past 6500.
Was looking at some of pac's stronger behives that they have but like the idea of dual springs if a breakage occurs. Was looking at what Brian Tooley offers but it looks like it takes alot of spring to control the roller rockers. I would rather have the tool steel retainers also.
What springs?
6500
1449111* 144536-16b 224 280 114 0.5 43.5 .000 .590
228 283 50.5 (2.5) .000 .590
Looking at going with a roller rocker on the combo but not sure yet. Harland sharp shaft 1.7's or yt ultra lite's maybe.
Won't be reved past 6500.
Was looking at some of pac's stronger behives that they have but like the idea of dual springs if a breakage occurs. Was looking at what Brian Tooley offers but it looks like it takes alot of spring to control the roller rockers. I would rather have the tool steel retainers also.
What springs?