I have a Schneider custom ground 234/230 .578 on a 112 and was going to switch over to this.

Comp XER 226/230 .600/.605 on a 111lsa....

Any opinions..??????


TIA

 

What is the reason for the swap ? Im not sure you would pick up any power and if you did I dont think it would justify a cam swap.

 

Just wanting to move the power down a little in the rpm band.....

 

You can try a 112+4 like my current cam . My peak is at 6100 rpm

r1 cam specs 232/236 .575/578

My old cam was the tr 230/224 .575/.569 111 peak power was at 6500 with that cam

so now i make more power at a lower rpm with more duration.

Jeremy