Atomic02

iTrader: (33)

So i just picked up my 50k mile lq4 yesterday and i am going to go with the tsp ms4 and stay with the stock heads for now. I was just going to buy the cam kit from tsp but i need to know what length pushrods to order? Anybody have this setup before or have any idea without installing the cam and checking it?

ckpitt55

iTrader: (4)

every setup is unique. you need to get a pushrod length checker and measure it.

2000PewterT/A

I never get a set of pushrods, I always measure to get the exact length, its 20 bucks well spent.

Atomic02

iTrader: (33)

Yeah i figured i would get that response. Its just that if you order the kit from tsp you have to add you pr length

leeluther252

iTrader: (17)

If you call in you can always order the kit but have them wait to ship the pushrods until you measure them. Also if they haven't been ran, they will let you exchange them if you choose wrong. You just have to pay for shipping. As stated before measuring is the only way to be sure, but assuming the heads are stock, you will most likely need a 7.400, but that's not 100% of course.