comp cam 54-530-11
09-15-2013, 02:41 PM
#1
TECH Enthusiast
Thread Starter
iTrader: (3)
Join Date: Apr 2009
Location: morristown,tn
Posts: 572
Likes: 0
Received 0 Likes
on
0 Posts
comp cam 54-530-11 is this cam any good? its going in a 2001 tahoe 4x4 i just want a lil power and chop lol and will my stock springs hold up?
09-15-2013, 02:53 PM
#2
No, don't use stock springs.
I'd at least you some LS6 valve springs, and you will not get any lope from that cam , since it has to much negative overlap (-25* OL).
I'd go with at least this cam: Comp Cams 54-408-11 (206/212 112lsa+2), it going to give you noticeably better power, but it still has to much negative overlap(-15*) to hear any lope.
http://www.ws6project.com/user_stor/...e-rpm-206-212/
I'd at least you some LS6 valve springs, and you will not get any lope from that cam , since it has to much negative overlap (-25* OL).
I'd go with at least this cam: Comp Cams 54-408-11 (206/212 112lsa+2), it going to give you noticeably better power, but it still has to much negative overlap(-15*) to hear any lope.
http://www.ws6project.com/user_stor/...e-rpm-206-212/
Last edited by 99Bluz28; 09-15-2013 at 03:05 PM.
09-15-2013, 03:12 PM
#3
TECH Enthusiast
Thread Starter
iTrader: (3)
Join Date: Apr 2009
Location: morristown,tn
Posts: 572
Likes: 0
Received 0 Likes
on
0 Posts
well i traded it for some ls1 coils and i didn't have any money in those. will this cam feel better then the stock one, and will my truck give a good run against these truck loving red necks!! lol
09-15-2013, 03:18 PM
#5
TECH Enthusiast
Thread Starter
iTrader: (3)
Join Date: Apr 2009
Location: morristown,tn
Posts: 572
Likes: 0
Received 0 Likes
on
0 Posts
No, don't use stock springs.
I'd at least you some LS6 valve springs, and you will not get any lope from that cam , since it has to much negative overlap (-25* OL).
I'd go with at least this cam: Comp Cams 54-408-11 (206/212 112lsa+2), it going to give you noticeably better power, but it still has to much negative overlap(-15*) to hear any lope.
http://www.ws6project.com/user_stor/...e-rpm-206-212/
I'd at least you some LS6 valve springs, and you will not get any lope from that cam , since it has to much negative overlap (-25* OL).
I'd go with at least this cam: Comp Cams 54-408-11 (206/212 112lsa+2), it going to give you noticeably better power, but it still has to much negative overlap(-15*) to hear any lope.
http://www.ws6project.com/user_stor/...e-rpm-206-212/
