Jegs lifters.......???
Thread Starter
Launching!
Joined: Apr 2011
Posts: 248
Likes: 0
Jegs lifters.......??? Flipping through the new jegs and seen they have lsx lifters that SOUND pretty decent not sure of the part # 189.00 for the set. Wonder if they're. Worth a ****
Special Features:
Four Oil Feeds for Increased Oil Flow
Cam-Film Oiling Reliefs for Roller Lubrication
Extended Body Length for More Lift
Special Retaining Rings
Uses Stock Length Pushrods & Stock Style Lifter Guides (Available Separately)
Direct Drop-In Replacement
Set of 16 Tappets
Special Features:
Four Oil Feeds for Increased Oil Flow
Cam-Film Oiling Reliefs for Roller Lubrication
Extended Body Length for More Lift
Special Retaining Rings
Uses Stock Length Pushrods & Stock Style Lifter Guides (Available Separately)
Direct Drop-In Replacement
Set of 16 Tappets
Last edited by pairof69s; Sep 25, 2013 at 11:32 PM.
Jegs/Summit brand engine parts are just relabeled parts from more credibly makers. For example, the valves on my Gen 1 SBC are Summit valves that are relabeled Mallory valves. Only difference is that they were a lot cheaper.
Best bet is to search around on the internet and see if you can figure out who really makes them.
Best bet is to search around on the internet and see if you can figure out who really makes them.
