I am doing a cam swap, I know ls1howto tells you how to do heads and cam, but I am only doing the following: hotcam kit, pushrods, timing chain, retainers. Can anybody give me a good detailed of the installation! first time doing a cam install <img border="0" title="" alt="[Frown]" src="gr_sad.gif" /> (99 z28) and all of the parts needed to do it. help would be greatly appreciated

 

Eventually I'll have a document stating how to do it without removing the heads (using magnets), but in the meantime, here's a very good writeup

http://www.torquecentral.com/mods/GM...ll/default.asp