ASA or Howards Cam Question
#21
I have Howards ASA cam with PRC stage 1 heads milled .030 with .045 cometic head gaskets. Texas motor speed said I could go with .035.
When I measured I was .083 Exhaust and .121 Intake PTV.
I know the 241 and 243 are different, just thought I would give my two cents with the cam.
I would still check, every engine is a little different.
1999 LS1
When I measured I was .083 Exhaust and .121 Intake PTV.
I know the 241 and 243 are different, just thought I would give my two cents with the cam.
I would still check, every engine is a little different.
1999 LS1