stanggreg90

iTrader: (19)

Im building my motor this year with all forged internals, and the only thing im having a problem with is the cam that i should go with. Im using my stock 347 block with 62cc afr heads wieco flat top/-3.2cc reliefs (3.905), comstar 6.125 connecting rods with arp2000 hardware, callies compstar forged crankshaft 3.622. Blower is a procharger what cam would work best and im kind of looking for it to be a 112 lobe separation if possible. Would like ot to have a good rough idle sound, thanks guys.

Darkman

iTrader: (2)

Rough idle and a 112 LSA - most of the blower cams I've seen on this board have neither.

mjs1012

iTrader: (36)

Brute speed blower cam would be my choice.

stanggreg90

iTrader: (19)

Ok thanks i will look into that

99Bluz28

iTrader: (35)

I go with something like this, or very similar.
226/238 116lsa+5, IVC is 44, and it has 0* overlap so you'll still know it has a cam.
Use the Comp Cams LXL lobes #13158(226 w/.605"lift) for the intake, and Extreme RPM (high lift) #3652(238 w/.585" lift) for the exhaust.