LS1TECH - Camaro and Firebird Forum Discussion

Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

FAST Intake Question

Thread Tools
 
Search this Thread
 
Old Sep 22, 2014 | 03:51 PM
Share
  #1  
5.0stang's Avatar
5.0stang
Thread Starter
Launching!
iTrader: (1)
 
Joined: Sep 2007
Posts: 207
Likes: 0
Default FAST Intake Question
Can you use the factory intake bolts on these aftermarket intakes?

Just was wondering if the boss heights are the same, so the same length can be used.

Thanks!
Reply
0
Old Sep 22, 2014 | 03:58 PM
Share
  #2  
thunderstruck507's Avatar
thunderstruck507
11 Second Club
iTrader: (18)
 
Joined: Mar 2008
Posts: 8,358
Likes: 27
From: Northwest AR
Default
At least on the 90mm you can because I did. I suspect the 92mm will also accept them.

Not sure about the 102mm
Reply
0
Old Sep 22, 2014 | 06:57 PM
Share
  #3  
99Bluz28's Avatar
99Bluz28
TECH Senior Member
iTrader: (35)
 
Joined: Nov 2007
Posts: 9,705
Likes: 11
From: C. V., Kalifornia
Default
They work fine with a FAST 92 intake manifold, not sure about the 102 intake manifold.
Reply
0
Old Sep 22, 2014 | 07:07 PM
Share
  #4  
JakeFusion's Avatar
JakeFusion
Super Hulk Smash
20 Year Member
Liked
Loved
Community Favorite
iTrader: (7)
 
Joined: Aug 2004
Posts: 11,258
Likes: 146
From: Pace, FL
Default
I used whatever came with the 102. The 102 is taller, so I suspect you need to use the FAST hardware with it.
Reply
0
Old Sep 22, 2014 | 10:13 PM
Share
  #5  
01ssreda4's Avatar
01ssreda4
TECH Senior Member
15 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (96)
 
Joined: Aug 2007
Posts: 24,241
Likes: 89
From: Turnin' Wrenches Infractions: 005
Default
I used stock bolts with my 92.
Reply
0
Old Sep 22, 2014 | 11:10 PM
Share
  #6  
mchdg86's Avatar
mchdg86
TECH Enthusiast
iTrader: (3)
 
Joined: Dec 2004
Posts: 514
Likes: 0
From: Tulsa OK
Default
Stock ones work fine with the 102 also.
Reply
0
Old Oct 4, 2014 | 03:36 PM
Share
  #7  
Thee Antic's Avatar
Thee Antic
Registered User
iTrader: (1)
 
Joined: Mar 2014
Posts: 59
Likes: 0
From: Sneads Ferry, NC
Default
Stock is fine.
Reply
0

Trending Topics

Old Oct 9, 2014 | 06:04 PM
Share
  #8  
laurentj23's Avatar
laurentj23
TECH Apprentice
iTrader: (27)
 
Joined: Sep 2014
Posts: 300
Likes: 1
Default
I believe you need to change the valley cover bolts to the one provided by the kit to prevent damage to the manifold. That's what the installation instructions stated.
Reply
0
Back to Subforum
Generation III Internal Engine
View Next Unread
Heads,cam suggestions for lq4




Advanced Search

All times are GMT -5. The time now is 01:21 AM.