Thinking of using this kit for my rebuild
Thread Starter
Staging Lane
Joined: Nov 2014
Posts: 62
Likes: 6
From: Ridgefield,Washington
Thinking of using this kit for my rebuild I have a LM7 5.3 that I got free from work.
The engine ran but the water pump leaked when I brought it home.
I removed the heads and oil pan yesterday, and this thing is dirty inside.
Like oil changes were a luxury this little guy was never given.
I would like to send the heads to TEA for a clean up,and use this kit to freshen up the bottom end.
Is this a decent choice http://www.summitracing.com/parts/fem-bk6081000 ?
This will be for a pro touring, road trip style build.
The engine ran but the water pump leaked when I brought it home.
I removed the heads and oil pan yesterday, and this thing is dirty inside.
Like oil changes were a luxury this little guy was never given.
I would like to send the heads to TEA for a clean up,and use this kit to freshen up the bottom end.
Is this a decent choice http://www.summitracing.com/parts/fem-bk6081000 ?
This will be for a pro touring, road trip style build.
I have a LM7 5.3 that I got free from work.
The engine ran but the water pump leaked when I brought it home.
I removed the heads and oil pan yesterday, and this thing is dirty inside.
Like oil changes were a luxury this little guy was never given.
I would like to send the heads to TEA for a clean up,and use this kit to freshen up the bottom end.
Is this a decent choice http://www.summitracing.com/parts/fem-bk6081000 ?
This will be for a pro touring, road trip style build.
The engine ran but the water pump leaked when I brought it home.
I removed the heads and oil pan yesterday, and this thing is dirty inside.
Like oil changes were a luxury this little guy was never given.
I would like to send the heads to TEA for a clean up,and use this kit to freshen up the bottom end.
Is this a decent choice http://www.summitracing.com/parts/fem-bk6081000 ?
This will be for a pro touring, road trip style build.
As mentioned, you could bore the block to a 3.898" or 3.903" and get the added cubes. It could be done reasonably cheap if you could locate a set of used LS1 or LS6 pistons and rods. Install a set of Sealed Power rings and a set of ARP rod bolts, and go down the road. We don't have any used pistons or rods, but we can help on the rebuild kit, bearings, etc. Just let us know!
__________________
Largest Stocking Distributor of LS-x Engines / CHECK OUT OUR NEW WEBSITE!
COMP - FAST - PACESETTER - DIAMOND RACING - EAGLE SPECIALTY PRODUCTS - CALLIES - COMETIC GASKETS
RAM CLUTCHES - MOSER ENGINEERING - KOOK'S HEADERS - ARP - GM BOLTS AND GASKETS - MSD - NGK
POWERBOND - ASP - AND MORE!
Largest Stocking Distributor of LS-x Engines / CHECK OUT OUR NEW WEBSITE!
COMP - FAST - PACESETTER - DIAMOND RACING - EAGLE SPECIALTY PRODUCTS - CALLIES - COMETIC GASKETS
RAM CLUTCHES - MOSER ENGINEERING - KOOK'S HEADERS - ARP - GM BOLTS AND GASKETS - MSD - NGK
POWERBOND - ASP - AND MORE!
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
