LS1TECH - Camaro and Firebird Forum Discussion

Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Compression Test Results

Thread Tools
 
Search this Thread
 
Old Feb 7, 2015 | 12:11 PM
Share
  #1  
bane89's Avatar
bane89
Thread Starter
12 Second Club
iTrader: (3)
 
Joined: May 2013
Posts: 48
Likes: 0
From: So·Cal
Default Compression Test Results
Had a compression test done last night on my camaro. It read 165 across all 8 cylinders.

Is that ok for a cammed and bolt on ls1 with 175k. The heads have never been removed.
Reply
0
Old Feb 7, 2015 | 12:55 PM
Share
  #2  
02blksscmro's Avatar
02blksscmro
Teching In
 
Joined: Jul 2014
Posts: 24
Likes: 0
From: CT
Default
Consistency between cylinders is the most important thing with a compression test. If all cylinders are close to the same psi
then you are ok.
Reply
0
Old Feb 7, 2015 | 01:05 PM
Share
  #3  
bane89's Avatar
bane89
Thread Starter
12 Second Club
iTrader: (3)
 
Joined: May 2013
Posts: 48
Likes: 0
From: So·Cal
Default
Originally Posted by 02blksscmro
Consistency between cylinders is the most important thing with a compression test. If all cylinders are close to the same psi
then you are ok.
Thanks buddy
Reply
0
Back to Subforum
Generation III Internal Engine
View Next Unread
Crank rubbing on block? Picture inside




Advanced Search

All times are GMT -5. The time now is 08:56 PM.