lq4 swap HELP PLEASE

Reply Subscribe

Thread Tools

Search this Thread

Apr 22, 2015 | 03:14 PM

Pachino Hamilton

Thread Starter

Teching In

Joined: Jan 2015

Posts: 2

Likes: 0

lq4 swap HELP PLEASE

Hey guys I need help with my swap!!!! I have a lq4 and a 4l60e transmission for my F BODY (2002 Camaro z28) I was wondering should I change my rear end or not??????

Apr 22, 2015 | 09:10 PM

Taxman20

TECH Resident

iTrader: (11)

Joined: Nov 2014

Posts: 976

Likes: 1

From: San Marcos, Tx

Should be fine with stock rear. The engine doesn't make that much power. If you get upwards of 450 or more, you might want to beef it up or swap it then.

Apr 22, 2015 | 09:13 PM

98Zeric

Launching!

Joined: Nov 2014

Posts: 234

Likes: 16

From: South dakota

Guess alot depends on you plans for the swap.From what I know ..having an auto helps prolong. .I also came across a few post where some have had no issues and have some built cars.. if you have the money or the know how (8.8 swap) I would just plan on replacing the 10bolt.. just my .02.. I plan on doing that first before I swap in the 6.0. I'm even thinking 4l80 swap.. the 60e not really known for being the strongest..plus the gap between 1st to 2nd sucks

Apr 23, 2015 | 07:06 AM

2000WS6TA

12 Second Club

iTrader: (5)

Joined: Aug 2005

Posts: 587

Likes: 1

From: finksburg, MD

should be fine as it is. i plan on using my 10 bolt for my turbo street car for a while. my understanding is horsepower doesn't necessarily break rear ends, but traction does.

Apr 23, 2015 | 07:57 AM

98Zeric

Launching!

Joined: Nov 2014

Posts: 234

Likes: 16

From: South dakota

Good point^^^

Apr 23, 2015 | 01:11 PM

RockinWs6

TECH Addict

Joined: Mar 2013

Posts: 2,628

Likes: 30

I broke mine on the 1-2 shift WOT pulling away from a stop light. Broke the carrier. All stock a4......... the rears are so tiny its a joke. If I want to I could break it at will.

Apr 23, 2015 | 01:20 PM

smws6ta

Launching!

iTrader: (5)

Joined: Jan 2010

Posts: 237

Likes: 2

Quote:

Originally Posted by 2000WS6TA

should be fine as it is. i plan on using my 10 bolt for my turbo street car for a while. my understanding is horsepower doesn't necessarily break rear ends, but traction does.

correct...but with no traction = no moving.

Even a M6 with DR's can break the stock 10 bolt.

I have an 8.8 rear with my 403ci LQ build. Just waiting for my tune session on the 1st.

If you plan on a high HP build the rear and proper suspension mods will be important to do if you plan on not being broke all the time. Waste no $$$ on a 10bolt. 12 bolts, 9" or if you got the means to make one 8.8. I know Hawks 3rdgen is selling 8.8's now too.

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last