LS1TECH - Camaro and Firebird Forum Discussion

Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Engine combo help! Need cam

Thread Tools
 
Search this Thread
 
Old Jun 6, 2015 | 10:46 AM
Share
  #1  
RedDemon_ls's Avatar
RedDemon_ls
Thread Starter
Staging Lane
 
Joined: Sep 2014
Posts: 62
Likes: 0
Default Engine combo help! Need cam
I have a lq9 in a trans am auto with p&p 243 heads, fast 90/90, 3.73, 4200 ptc converter ! I'm wondering what cam would go best with my set up to make power and pull really hard ! Not Afraid to drive on a bigger cam
Reply
0
Old Jun 6, 2015 | 10:51 AM
Share
  #2  
HCI2000SS's Avatar
HCI2000SS
TECH Senior Member
iTrader: (2)
 
Joined: Aug 2012
Posts: 11,137
Likes: 20
From: Howell & Fenton MI
Default
I have a LQ9 as well with p&p 5.3 heads and run a cam that's almost identical to the MS3 but with a lot more advance. Works great on my setup
Reply
0
Old Jun 6, 2015 | 10:52 AM
Share
  #3  
RedDemon_ls's Avatar
RedDemon_ls
Thread Starter
Staging Lane
 
Joined: Sep 2014
Posts: 62
Likes: 0
Default
What is the specs
Reply
0
Old Jun 6, 2015 | 11:00 AM
Share
  #4  
HCI2000SS's Avatar
HCI2000SS
TECH Senior Member
iTrader: (2)
 
Joined: Aug 2012
Posts: 11,137
Likes: 20
From: Howell & Fenton MI
Default
612/612 lift
236/242 duration
112+4 lsa
Reply
0
Old Jun 6, 2015 | 11:04 AM
Share
  #5  
RedDemon_ls's Avatar
RedDemon_ls
Thread Starter
Staging Lane
 
Joined: Sep 2014
Posts: 62
Likes: 0
Default
How much power ?
Reply
0
Old Jun 6, 2015 | 11:08 AM
Share
  #6  
HCI2000SS's Avatar
HCI2000SS
TECH Senior Member
iTrader: (2)
 
Joined: Aug 2012
Posts: 11,137
Likes: 20
From: Howell & Fenton MI
Default
Haven't had it on the dyno with the new tune and Fast 92, but it moves out pretty damn good for what is. As you can see all my mods are in my signature
Reply
0
Back to Subforum
Generation III Internal Engine
View Next Unread
h/c/i




Advanced Search

All times are GMT -5. The time now is 09:23 PM.