need help identifying these rods
Thread Starter
Teching In
Joined: Aug 2015
Posts: 24
Likes: 0
need help identifying these rods 
Hi I just tore down my 4.8 today I noticed the rods look pretty beefy for stock there are numbers on them but I can't find out anything about them.
They are stamped gkn 3468 and have a 136 on one side and a 172 on the other side.
On the sides are 217 and 241 on six of them and 207 and 241 on two of them.
Any ideas of what these are and are they worth running?
Thanks for any info
Last edited by mjl1977; Aug 31, 2015 at 07:44 PM.
Thread Starter
Teching In
Joined: Aug 2015
Posts: 24
Likes: 0
My block is a gen 3 4.8 cam sensor is in back 482 crank flat top pistons with weird numbers on them. I was expecting press on pistons but now see they are floating with clips.
Is this normal for the gen3 4.8 kinda feel like I scored kinda.
Is this normal for the gen3 4.8 kinda feel like I scored kinda.
Last edited by mjl1977; Aug 31, 2015 at 07:45 PM.
