When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
So I used the sticky trick and also what Darth_V8r recommended and got the motor mount situation figured out. It's all set now. I used the stock jack and put it between the strut tower and the motor mount and cranked it up until it was even. I also had a jack underneath to align the bolt hole vertically.
Shout out to Stickies! Man I knew I should have used a strap when my tranny kept sliding and tipping on the Jack. Ill try it out since I probably have to pull it again.
Shout out to Stickies! Man I knew I should have used a strap when my tranny kept sliding and tipping on the Jack. Ill try it out since I probably have to pull it again.
My jack came with a little chain that was supposed to hook over it but that was worthless. The ratchet strap worked awesome though. Takes some finagling but slid right in. Sucks Brew. Hopefully the O ring trick you thought up works so you don't have to do it again.
So Kevin @ MWC emailed me yesterday and my fab9 and hood rails should ship next Wednesday or Thursday!!! Super pumped about this. I should be able to make some awesome progress when it comes. The painter is waiting patiently also
Whew, just caught up. great work on that thing, almost there and then the parts department drops the ball again
Going to be a blast for sure, my car will hope to be like that when it grows up
LOL. Thanks man!!
It's coming along. I should have my rear end in the next couple days, it shipped yesterday and they're not that far from me. I can't wait, everything is set to throw it in.