Using ls7 lifters in my 5.3?
#1
On The Tree
Thread Starter
Join Date: Jun 2014
Location: Kansas City MO
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
Using ls7 lifters in my 5.3?
I just bought an 04 5.3 and want to switch lifters out of my ls1. Will I need to change anything else by doing this?
Last edited by Fier23; 12-16-2015 at 11:12 AM. Reason: Forgot
#2
LS1Tech Premium Sponsor
iTrader: (2)
I would recommend installing new lifter trays as well. Other than that, all that is required is new head gaskets and head bolts. I would inspect the valve cover gaskets & intake manifold gaskets as well though those can usually be reused.
Lonnie
Lonnie
__________________
NOW OFFERING TSP BY YANK CONVERTERS
COMP - FAST - PACESETTER - WISECO PISTONS - LUNATI - CALLIES - NEW TSP BRAND CRANK & RODS - COMETIC GASKETS
RAM CLUTCHES - MOSER ENGINEERING - ARH HEADERS - ARP - GM BOLTS AND GASKETS - MSD - NGK
POWERBOND - ASP - PRECISION INDUSTRIES - YANK - CIRCLE D - AND MORE!
COMP - FAST - PACESETTER - WISECO PISTONS - LUNATI - CALLIES - NEW TSP BRAND CRANK & RODS - COMETIC GASKETS
RAM CLUTCHES - MOSER ENGINEERING - ARH HEADERS - ARP - GM BOLTS AND GASKETS - MSD - NGK
POWERBOND - ASP - PRECISION INDUSTRIES - YANK - CIRCLE D - AND MORE!
NEW NUMBER (512)863-0900
#3
On The Tree
Thread Starter
Join Date: Jun 2014
Location: Kansas City MO
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
Great to hear. Yea I'm going to use the LS7 lifters and trays out of my ls1 build with only 5000mi. Other than moving all the bolt on pulleys and pumps I'm leaving it stock.