New guy and need some input.
Thread Starter
Teching In
Joined: Aug 2016
Posts: 3
Likes: 0
New guy and need some input. Lots of useful information on this site. I'm new to the LS engine and I'm building my first one in a 2006 chevy 2500hs lq4 6.0. I pull some but not all the time.
Needs to know if my set up im going with is a good foundation.
Lq4 6.0 block
20 over with flat top pistons no valve relief.
243 heads stock
Tsp 216/220 .600 cam 112ls
Ls7 lifter
Matching springs and pushrods
High flow and pressure oil pump
Bullet timing set
Shorty headers (for now)
3in exhaust dual
Stock truck intake manifold
Cold air intake
Stock converter .
Stock crank and rods
Will be tuned...
Currently at a 11.1 cr. Hoping to get it down a little with head gasket.
Curious as to possibly what kind of power I'll be making.
Any advice would be helpful.
Any ideas on what kind of power ill make
Needs to know if my set up im going with is a good foundation.
Lq4 6.0 block
20 over with flat top pistons no valve relief.
243 heads stock
Tsp 216/220 .600 cam 112ls
Ls7 lifter
Matching springs and pushrods
High flow and pressure oil pump
Bullet timing set
Shorty headers (for now)
3in exhaust dual
Stock truck intake manifold
Cold air intake
Stock converter .
Stock crank and rods
Will be tuned...
Currently at a 11.1 cr. Hoping to get it down a little with head gasket.
Curious as to possibly what kind of power I'll be making.
Any advice would be helpful.
Any ideas on what kind of power ill make
