tberg725

I have spoken to him and he has recommended the stage 3 cam and to run a converter between 3200 and 3600 i feel comfortable running a yank 3600ss so my question is who is running this cam and do you have any dyno graphs i would like to see the power and torque curve this cam is throwing, how does it feel and whats peak power sitting at i do not want to be running 7k + rpm so id like to see how this cam is running in other peoples motors before ordering it

HCI2000SS

iTrader: (2)

I don't run it but have heard good things about it in the right setup

tberg725

Same here and I seen this claim right here "This cam on a 2002 Trans Am stock bore LS1 through LS6 intake/TB, TFS CNC 205'S, 1.750 headers achieved 440rwhp and 407rwt with a 6 speed." so just wondering how well this cam ran for others

HCI2000SS

iTrader: (2)

That's a pretty big cam to run with stock heads though, so I'd do a 3600 stall at minimum. A 3.73 gear would help some as well

98CayenneT/A

Not exactly the same cam but my buddy ran 11.6@114 mph with ported 243's /tick stg. 3 cam/ PT 4000 converter with a DA of 4000 ft. on a 90 + degree day.

I see no reason he will not be fighting for a 10.9 but absolutely has a 11.2 - 11.3 @ 118+ mph in it come fall.

tberg725

Well the heads are only going to be stock for this season by next season i will have aftermarket heads either gonna get ahold of mamo or go with the prc 237 as i will also be steping up cubes next seson as well so i want heads that will work with that