Builder/parts selection
10-19-2017, 09:11 PM
#1
Teching In
Thread Starter
Join Date: Aug 2005
Location: Virgina
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Builder/parts selection searching for information on buying a LS short block. Looking for information on K1 cranks/Rods and the Dart SHP blocks. Anything I should know? I have read for the past week and tired of reading. Ready to buy. I thought I had chosen a builder however I want to weigh options.
1 of my main concerns is having a cam speced. I would like to deal with only 1 place for short block and cam.
Thanks in advance. Dean
1 of my main concerns is having a cam speced. I would like to deal with only 1 place for short block and cam.
Thanks in advance. Dean
10-20-2017, 04:12 PM
#3
Teching In
Thread Starter
Join Date: Aug 2005
Location: Virgina
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
I am sorry I guess I left out some details.
Use will be drag racing.
I am leaning towards Thompson.
Just curious about the K1 stuff and about using them for cam selection.
Reason behind the cam selection worry is one builder suggest xxx for a carbed motor on spray then another says that same cam is best case for N/A.
Use will be drag racing.
I am leaning towards Thompson.
Just curious about the K1 stuff and about using them for cam selection.
Reason behind the cam selection worry is one builder suggest xxx for a carbed motor on spray then another says that same cam is best case for N/A.