Help with cam identification
10-23-2017, 11:19 AM
#1
Help with cam identification Can anyone help me out identifying this cam. This whole time I've been running it, it was supposed to be a Texas Speed MS3 (according to the previous owner of the motor). When I pulled it out this is what I found. It appears to be a Comp Cams grind, but I'm having trouble finding out exactly what it is. Any help you can give me would be great! Thanks!
10-23-2017, 12:28 PM
#2
TECH Senior Member
Comp Cams USED to grind TSP's cams so it could still be a TSP cam.
Looks like it's ground with a 113LSA advanced 4 degrees, using the lobes designated above.
Looks like it's ground with a 113LSA advanced 4 degrees, using the lobes designated above.
10-23-2017, 06:07 PM
#3
Can anyone help me out identifying this cam. This whole time I've been running it, it was supposed to be a Texas Speed MS3 (according to the previous owner of the motor). When I pulled it out this is what I found. It appears to be a Comp Cams grind, but I'm having trouble finding out exactly what it is. Any help you can give me would be great! Thanks!