As Cast PRC 225/Torquer V2
Thread Starter
Teching In
Joined: Apr 2014
Posts: 15
Likes: 0
From: Michigan
As Cast PRC 225/Torquer V2 Currently looking to buy a set of heads for my cammed 00 M6 T/A. Trying to decide between Texas Speeds As Cast 225 heads (62cc) or some 2.5 5.3 heads.
Currently have:
Stock bottom end
Torquer V2
Fast 92/92 Intake & TB
ARH 1 3/4 longtubes
I've searched around, and found some build threads with similar set ups (with the 225 heads), but with no final results. Has anyone seen any numbers? Or better yet graphs?
Currently have:
Stock bottom end
Torquer V2
Fast 92/92 Intake & TB
ARH 1 3/4 longtubes
I've searched around, and found some build threads with similar set ups (with the 225 heads), but with no final results. Has anyone seen any numbers? Or better yet graphs?
I used to run the Torquer V2 cam with PRC stage 2.5/5.3 heads, and it was a very nice combo IMO. No numbers, but with a 4.10 gear and M6 it would move out really well for what it had.
I see you're in MI. Wherabouts?
I see you're in MI. Wherabouts?
Thread Starter
Teching In
Joined: Apr 2014
Posts: 15
Likes: 0
From: Michigan
I'm from Warren. How about yourself?
I'm in the Fenton area near Flint
Staging Lane
Joined: May 2014
Posts: 54
Likes: 0
From: Waterford MI
this may not help a ton but i have the torquer 3 that is no longer around and the ls6 stage 2.5 head with the 102 fast and prc 102 TB on my A4 (semi close to what youre thinking) i put down 425 to the tire and my tune is not that great. Hope maybe that helps some, would think around that 400 range
