Lq4
Thread Starter
Staging Lane
Joined: Aug 2018
Posts: 95
Likes: 24
https://ls1tech.com/forums/dynamomet...317-s-cam.html
came across this thread that was mentioned above, any thoughts? i realize this is an LQ9 but how realistic are these numbers?
came across this thread that was mentioned above, any thoughts? i realize this is an LQ9 but how realistic are these numbers?
LS1Tech Sponsor
Joined: Jan 2008
Posts: 2,233
Likes: 1,521
From: Ohio, Georgia, Nevada, Texas
https://ls1tech.com/forums/dynamomet...317-s-cam.html
came across this thread that was mentioned above, any thoughts? i realize this is an LQ9 but how realistic are these numbers?
came across this thread that was mentioned above, any thoughts? i realize this is an LQ9 but how realistic are these numbers?
LS1Tech Sponsor
Joined: Jan 2008
Posts: 2,233
Likes: 1,521
From: Ohio, Georgia, Nevada, Texas
$1000 gets you cam and valve train and the next 5% hp will cost you another $1000 and quite a bit more effort.
Thread Starter
Staging Lane
Joined: Aug 2018
Posts: 95
Likes: 24
the car is a street/strip car it does some highway cruising and goes to the track once a month or so. id rather just be able to get a cam and an intake to bolt on but id be ok doing some work to the current heads. but if that isnt enough for around 450rwhp im open to some different heads
LS1Tech Sponsor
Joined: Jan 2008
Posts: 2,233
Likes: 1,521
From: Ohio, Georgia, Nevada, Texas
the car is a street/strip car it does some highway cruising and goes to the track once a month or so. id rather just be able to get a cam and an intake to bolt on but id be ok doing some work to the current heads. but if that isnt enough for around 450rwhp im open to some different heads
Last edited by Summitracing; Nov 16, 2018 at 06:04 PM.
Thread Starter
Staging Lane
Joined: Aug 2018
Posts: 95
Likes: 24
Using the Pro Ls stage 3 412 whp unlocked converter number just as a basis; the next place to spend money is heads. The Tfs220 Heads get you the compression and flow and already have the spring pack you need with the Stage 3 cam so you can save that money. You will hit your 450 and closer to 475 number easily without machining. It will have good bottom end and will make your tuners job easy. Also fun to drive with 400 ft/lbs + starting at 3500 rpm
LS1Tech Sponsor
Joined: Jan 2008
Posts: 2,233
Likes: 1,521
From: Ohio, Georgia, Nevada, Texas
Not really. The big 317 chambers could be milled .030 and still fit pretty easily. That will help, but compression only jumps a little. The heads are still stock and don’t flow welll. If you mill .030 and swap the spring pack, you are realistically looking at 420. That being said, if you’ve never experienced 420whp, that will make your Chevelle really scoot and you can always add heads later and sell your old 317’s with spring packs to a turbo guy.
Last edited by Summitracing; Nov 16, 2018 at 07:03 PM.
LS1Tech Sponsor
Joined: Jan 2008
Posts: 2,233
Likes: 1,521
From: Ohio, Georgia, Nevada, Texas
TECH Senior Member
Joined: Jun 2016
Posts: 22,288
Likes: 3,615
From: Central Cal.
