Mavns Summit cam build. Just made 450+ rwhp.. Stage 2 cam aka the Tire Puller...
#1
Mavns Summit cam build. Just made 450+ rwhp.. Stage 2 cam aka the Tire Puller...
Thanksgiving is going to be me finishing breaking the car down and cleaning/painting parts .
Build is :
Stage 1 ghost summit cam ..I have a tsp 224r aswell. But I wanna try the new summit cam out .
Specs are 222/233 .600 .575 115+3
Tea stage 2 ported 5.3 heads - scored them for $500 with dual springs..!
milled them down .015 to a 59 cc chamber
I calculate around 11.15:1 comp on stock pistons.
fast 92/92 combo - got it really cheap.
13/4 speed e headers/y pipe
stock converter and 60e
42# inj
Wally 255
RMVB th350 I'll install next month after I get it running and tuned on the stock tranny .
then a Huron t4 kit in February. ��
Here some pics:
20 years old and never even had a valve cover off of it . Check the birds nest in the back lol Ill take more pictures tomorrow . The power steering pulley was so brittle it snapped into 6 pieces when i put the puller on it . After soaking it for an hour in pb blaster. This is going to be a fun project
My "shop" setup lol
I think it sat for a for a few years lol maybe 8-10
Better !
IDLE VIDEO. SHES READY FOR A TOooOoooON
Build is :
Stage 1 ghost summit cam ..I have a tsp 224r aswell. But I wanna try the new summit cam out .
Specs are 222/233 .600 .575 115+3
Tea stage 2 ported 5.3 heads - scored them for $500 with dual springs..!
milled them down .015 to a 59 cc chamber
I calculate around 11.15:1 comp on stock pistons.
fast 92/92 combo - got it really cheap.
13/4 speed e headers/y pipe
stock converter and 60e
42# inj
Wally 255
RMVB th350 I'll install next month after I get it running and tuned on the stock tranny .
then a Huron t4 kit in February. ��
Here some pics:
20 years old and never even had a valve cover off of it . Check the birds nest in the back lol Ill take more pictures tomorrow . The power steering pulley was so brittle it snapped into 6 pieces when i put the puller on it . After soaking it for an hour in pb blaster. This is going to be a fun project
My "shop" setup lol
I think it sat for a for a few years lol maybe 8-10
Better !
IDLE VIDEO. SHES READY FOR A TOooOoooON
Last edited by Mavn; 01-13-2019 at 12:08 PM.
Trending Topics
#18
Ready for some head !
Heeeeead
Almost ready to fire . My headers, fast 92, and powersteering pulley wont be in until monday . So i bolted the stock manifolds/cats on. And the ls1 intake/stock lid on to fure her up
And she runs!!! Very smooth!
https://youtu.be/BtVzcyMPjpM
#20
LS1Tech Sponsor
Join Date: Jan 2008
Location: Ohio, Georgia, Nevada, Texas
Posts: 2,031
Received 1,243 Likes
on
669 Posts
Last edited by Summitracing; 11-23-2018 at 09:26 PM.