PTV clearance? je pistons/ g5x2 .030 mill
07-12-2004 | 09:18 AM
#1
Thread Starter
Banned
Joined: May 2004
Posts: 203
Likes: 0
PTV clearance? je pistons/ g5x2 .030 mill will this pose piston to valve clearance issues?
forged 347 shortblock, JE pistons with 2CC valve reliefs (looks like they are like 1/4" deep reliefs or so)
milled afr heads (should be the same as milling ls6/ls1) milled .030 thousandths
2.02 1.60 valves
G5x2 cam 232/240 595/609 112
forged 347 shortblock, JE pistons with 2CC valve reliefs (looks like they are like 1/4" deep reliefs or so)
milled afr heads (should be the same as milling ls6/ls1) milled .030 thousandths
2.02 1.60 valves
G5x2 cam 232/240 595/609 112
Last edited by mattz06; 07-12-2004 at 09:55 AM.
