LS6 valve stem wear questions.
05-23-2019, 05:58 AM
#1
Teching In
Thread Starter
Join Date: May 2019
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
LS6 valve stem wear questions. Hi everyone,
I have a 2003 z06 im taking the heads off to repair a spark plug hole and while im at it do a cometic head gasket along with arp studs for forced induction maybe in the next 2 years.
Car already has MS4 cam, PAC dual springs with Ti retainers and manton pushrods. The rockers have the CHE trunnion upgrade.
Ive been having problems with the valve stem seals coming off. I measured all my valve stems and im getting 0.311.
What should be the correct size?
Thanks
I have a 2003 z06 im taking the heads off to repair a spark plug hole and while im at it do a cometic head gasket along with arp studs for forced induction maybe in the next 2 years.
Car already has MS4 cam, PAC dual springs with Ti retainers and manton pushrods. The rockers have the CHE trunnion upgrade.
Ive been having problems with the valve stem seals coming off. I measured all my valve stems and im getting 0.311.
What should be the correct size?
Thanks
