Lifters and rocker arms

Reply Subscribe

Thread Tools

Search this Thread

Jul 1, 2019 | 06:57 PM

Z28MEXICO

Thread Starter

Teching In

Joined: Mar 2019

Posts: 16

Likes: 0

From: Mexicali, Baja California

Lifters and rocker arms

hello brothers..

i m looking for some advice for finish my LS1

already have 799 ported heads with dual springs and all the stuff, a brian tooley stage 3 cam shaft (.660 lift), and high presure oil pump..

just need to know if the oem rocker arms can work with the new cam and valves.. and if the oem pushrods can work too

any recomendation for performance pushrods and rocker arms..

thanks a lot

Jul 1, 2019 | 07:23 PM

wannafbody

TECH Senior Member

iTrader: (3)

Joined: Apr 2006

Posts: 5,606

Likes: 1,150

From: Pittsburgh

OEM rockers are fine but the trunnion upgrade is a good idea.

Jul 1, 2019 | 08:32 PM

garygnu

TECH Senior Member

Joined: Feb 2009

Posts: 5,445

Likes: 4

2nd the trunnion bearing upgrade .get a pushrod length checker tool ,and measure for the correct length pushrod .TSP sells many lengths of pushrods .

Jul 2, 2019 | 12:28 PM

Z28MEXICO

Thread Starter

Teching In

Joined: Mar 2019

Posts: 16

Likes: 0

From: Mexicali, Baja California

Quote:

Originally Posted by wannafbody

OEM rockers are fine but the trunnion upgrade is a good idea.

thanks a lot...

Jul 2, 2019 | 05:02 PM

Z28MEXICO

Thread Starter

Teching In

Joined: Mar 2019

Posts: 16

Likes: 0

From: Mexicali, Baja California

thanks a lot

Jul 3, 2019 | 10:44 AM

vettenuts

TECH Senior Member

iTrader: (4)

Joined: Jul 2004

Posts: 8,092

Likes: 13

From: Little Rhody

Go with large OD pushrods and as previously mention, measure first. Summit is now selling them (made by Trend) as well as Manton. Pushrod flex can take out cam lobes. My $0.02.

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last