LS7 lifters
I’m sorry, I must’ve been thinking of someone else! Wait a tick, I’m not sorry! I clearly remember his post, and he deleted one as well! I am not going senile at 42!
rpkurbo: I’m glad my build inspired someone! I don’t do this for the money, I do it to save trucks. Most years we operate with a net loss. Luckily I am a %100 disabled vet. The Army compensates me quite well. So I can afford to lose some in my business!
rpkurbo: I’m glad my build inspired someone! I don’t do this for the money, I do it to save trucks. Most years we operate with a net loss. Luckily I am a %100 disabled vet. The Army compensates me quite well. So I can afford to lose some in my business!
Ask the moderator to explain what occurred. It's very simple and it doesn't involve me
Joined: Nov 2003
Posts: 6,216
Likes: 236
From: Wichita KS / Rancho San Diego
Thread Starter
Teching In
Joined: Apr 2018
Posts: 25
Likes: 4
Whatever you need to tell yourself. I know what I saw. I wouldn’t have reacted that way accept an a response to what I read. And if you read posts 4 and 5,their was definitely another comment there that I responded to. Now there isn’t. I rest my case. I don’t know about you guys, but I’m over it. So you were a dick and changed your tune, so what?
Whatever you need to tell yourself. I know what I saw. I wouldn’t have reacted that way accept an a response to what I read. And if you read posts 4 and 5,their was definitely another comment there that I responded to. Now there isn’t. I rest my case. I don’t know about you guys, but I’m over it. So you were a dick and changed your tune, so what?
Thread Starter
Teching In
Joined: Apr 2018
Posts: 25
Likes: 4
I remember that post, but there was one between 6 and 7 blasting me for building a customers truck off of youtube and forums. And I explored that I had talked to my customer about it, and he wasn’t paying any labor. I distinctly remember that post because it requested a more in depth explanation.
I remember that post, but there was one between 6 and 7 blasting me for building a customers truck off of youtube and forums. And I explored that I had talked to my customer about it, and he wasn’t paying any labor. I distinctly remember that post because it requested a more in depth explanation.
Thread Starter
Teching In
Joined: Apr 2018
Posts: 25
Likes: 4
Well I stand corrected, and look really stupid! I am genuinely sorry for accusing you 99Blackbird. I hope you can find it in your heart to forgive me. I honestly thought I saw your screen name beside that post, and then it disappeared. Please forgive me. all the stuff I said still stands, but against JaysSSZ28 not 99Blackbird!
TECH Senior Member
Joined: Jun 2016
Posts: 22,308
Likes: 3,625
From: Central Cal.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo Well I stand corrected, and look really stupid! I am genuinely sorry for accusing you 99Blackbird. I hope you can find it in your heart to forgive me. I honestly thought I saw your screen name beside that post, and then it disappeared. Please forgive me. all the stuff I said still stands, but against JaysSSZ28 not 99Blackbird!
Skymangs It's OK. Welcome to the forum Skymangs
Thank you to the fine moderator staff at LS1Tech for sorting this mess out and helping Skymange see what really occurred.
TECH Regular
Joined: Jul 2019
Posts: 421
Likes: 71
From: Tasmania Australia
I found the original question a good question, I've often wondered why some high performance pushrods are listed as Chrome Moly and others are just listed as heat treated and what the difference would be for a pushrod application, if any.
Joined: Nov 2003
Posts: 6,216
Likes: 236
From: Wichita KS / Rancho San Diego
