difference between 00 - 02 camaro

Reply Subscribe

Thread Tools

Search this Thread

Apr 22, 2020 | 10:18 AM

msystic27

Thread Starter

Staging Lane

Joined: Oct 2017

Posts: 53

Likes: 1

difference between 00 - 02 camaro

what is the changes made between 00-02 camaro in chassis and power train

Apr 22, 2020 | 02:40 PM

Bob570

TECH Enthusiast

Joined: Feb 2018

Posts: 644

Likes: 300

From: Michigan

Slightly different cam, LS6 intake used on the 01-02, better rod bolts on the 01-02, that's probably about it.

Apr 22, 2020 | 03:54 PM

omc8

TECH Fanatic

iTrader: (7)

Joined: May 2009

Posts: 1,539

Likes: 26

From: columbus,ohio

Quote:

Originally Posted by Bob570

Slightly different cam, LS6 intake used on the 01-02, better rod bolts on the 01-02, that's probably about it.

Yes 01 and 02 cars are pretty similar . 2000 had LS1 intake and egr valve .01-02 no egr because of LS6 intake .Most 00 cars had 853 heads , 01-02 had 241 heads 02 cars had mls head gasket 01 and earlier graphite .Some 01+ cars did have LS6 blocks. 00 car had 26lb injectors 01-02 28lb.

Apr 22, 2020 | 04:12 PM

msystic27

Thread Starter

Staging Lane

Joined: Oct 2017

Posts: 53

Likes: 1

i heard some where the front end geometry was improved over the 01 and earlier,
have any one else heard this

Apr 22, 2020 | 04:15 PM

99 Black Bird T/A

TECH Senior Member

iTrader: (4)

Joined: Nov 2001

Posts: 8,638

Likes: 1,501

I think 02 cars got the power steering cooler standard. You know the one that eventually fails and contaminates the PS fluid with coolant and vise versa.

In 00 typically only FireHawks, WS6, SS maybe B4C's or special order would have got the PS cooler standard.

The 00 vs 02 cam difference is interesting and probably not as much as first thought.

Fbody Cams see post #8 info below.

Stated Specs:
stock LS1 cam '98-00:
202/210 intake/exhaust degrees duration
.496/.496 inches lift
116 LSA

stock LS1 cam '01-02:
198/197 intake/exhaust degrees duration
.478/.478 inches lift
115 LSA

here is the correct info as spec'd by a $250,000 machine at Comp
stock 98 trans am cam

duration@.050 198.86 intake & 209.25 exhaust
lift .498 intake .497 exhaust
LSA 119.45

stock 02 trans am cam

duration@.050 196.37 intake & 208.72 exhaust
lift .464 intake .479 exhaust
LSA 115.92

Last edited by 99 Black Bird T/A; Apr 22, 2020 at 05:58 PM.

Apr 22, 2020 | 06:19 PM

omc8

TECH Fanatic

iTrader: (7)

Joined: May 2009

Posts: 1,539

Likes: 26

From: columbus,ohio

Yes the slightly smaller cam of the 01-02 cars was a step backwards , but the factory bump of 5hp to 310 was primarily due to the LS6 intake and the improved design of the exhaust manifolds they received the preceding year .How many other cars bone stock would deliver rwhp , compared to what was advertised rating ! There have been a few , but not most.

Apr 22, 2020 | 06:30 PM

msystic27

Thread Starter

Staging Lane

Joined: Oct 2017

Posts: 53

Likes: 1

thanks for the info
the cam profile would suggest the 98 is more torque oriented then the 2001-2002 which is more hp oriented 98( 119.5 ) 01-02 ( 115.5 )
on recent dyno test the LS2 cam seem to have the best of both worlds covered ( torque and horse power ) do you have the real specs on the LS2 cam?

Trending Topics

Scavenger pump ideas

11

242
Rear End Options

9

247
Trans cooler updated information

11

284
Engine damage diagnosing

68

3.3k
Canted valve heads

151

17.2k

Apr 22, 2020 | 07:50 PM

99 Black Bird T/A

TECH Senior Member

iTrader: (4)

Joined: Nov 2001

Posts: 8,638

Likes: 1,501

FWIW - I don't like the LS2 cam at all. It has floated valves quicker than any other factory cam in some tests from what I've read.

This has floated around web both on LS1Tech & the Corvette forum.

According to our cam doctor, the LS2 specs are as follows.

Lobe Seperation = 115.9

Intake Centerline = 111.9
Exhaust Centerline = 119.9

Intake Duration @ .050 = 203.7
Exhaust Duration @ .050 = 212.5

Intake valve lift = .52044
Exhaust valve lift = .52111

The 2002 LS6 cam is better in my opinion. Not as prone to float valves & more powerful.
02 LS6 Cam specs

These are "actual" numbers from a cam that was check with Cam Doctor
Duration@.050: 205* intake, 219* exhaust
Lift: 0.551 intake, 0.549 exhaust
LSA: 117.4

GM shows this for lift. Not sure of the other spec's
.551-in lift on the intake and .547 on the exhaust.