Help ID TrickFlow heads please
Thread Starter
Joined: Dec 2003
Posts: 1,015
Likes: 103
From: Battle Ground, WA
Help ID TrickFlow heads please Picked these up here locally in the PNW a while back. Trying to see if anyone recognized them or the markings.
They are TrickFlow and have a casting number of 9210 on the usual spot. They are then engraved with 225 CNC.
On the front of the heads I have J03414 and 4802 stamped.
I know it is a shot in the dark, but figured I would ask
They are TrickFlow and have a casting number of 9210 on the usual spot. They are then engraved with 225 CNC.
On the front of the heads I have J03414 and 4802 stamped.
I know it is a shot in the dark, but figured I would ask
Thread Starter
Joined: Dec 2003
Posts: 1,015
Likes: 103
From: Battle Ground, WA
Yes sir. Emailed them yesterday.
The heads appear to have had some additional hand work done to them. (Smoothed out the usual CNC ridges)
so those other numbers may have come from elsewhere.
The heads appear to have had some additional hand work done to them. (Smoothed out the usual CNC ridges)
so those other numbers may have come from elsewhere.
