LS-6 heads with CNC porting... 11.2 cr, milled .055
03-22-2003, 05:46 PM
#1
Teching In
Thread Starter
Join Date: Mar 2003
Location: Huntington Beach, CA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
LS-6 heads with CNC porting... 11.2 cr, milled .055 I was curious if anybody was having trouble tuning out KR (Detonation)with this amount of CR 11.2?
Also, if you are using these heads, what cam are you using and what kind of power are these heads making? Thanks...
Also, if you are using these heads, what cam are you using and what kind of power are these heads making? Thanks...
