trans00am

After a few set backs I can move forward with doing something with my 2000 T/A. Car is a 6 speed with Speed Engineering LT's, catted Y and magnaflow muffler with a Trick Chassis 9in 3.89 gears. I am thinking of a TSP 228/232 112 cam and all the supporting mods. I found a set of 317's locally for $50. Came off a 6.0 with a bad knock. Unfortunately, I don't have more details on the heads. $50 worth the gamble on these? Car is mostly a weekend warrior and hitting the drag strip once or twice a month.

G Atsma

Your compression will drop like a rock...

shakenfake

Do not buy those heads. Just do the cam and save up for some Trickflow heads.

G Atsma

OR get some 243/799 heads, and do or have done some bowl blending and a good multiangle valve job.

shakenfake

That works too^^^

I just saw some complete 243s for $450 the other day

RedXray

If you can get the complete engine for a deal and it's not trashed, having a re-build-able 6.0 for a backup is always good.

trans00am

I dont have space for a block right now, unfortunately. No garage. In looking around last night, I saw AFR has as cast heads now. May look into those further.

RedXray

Good choice, love my PRC 225 as cast.