383 Stroker Oil Pan & Windage Tray options for Chevy Silverado ?
#1
Teching In
Thread Starter
383 Stroker Oil Pan & Windage Tray options for Chevy Silverado ?
2001 Chevrolet Silverado w/ 5"/7" body drop. Building a Gen III 5.3L into a 383c.i. stroker. Looking for a quality brand replacement and part #'s for a direct bolt on 4" stroker oil pan and windage tray set up ? Ideally with Turbo feed and Drain inlet/outlets.
#2
TECH Fanatic
Holley P/N 302-3 will get you where you want to go my Canadian friend. Two 1/2" Oil Drains and clearance for 4.00 Stroke. You will need an adapter for your turbo feed, ICT billet would be a good place to look for that.
#4
TECH Fanatic
Hard to say exactly, but that was the same number I had on my parts spreadsheet for GMT400 fitment, so I bet its real close on your GMT800
#5
TECH Senior Member
iTrader: (4)
Performance-aluminum-windage-trays-4-strokers might be worth a look by Improved Racing one of our sponsors.
The following users liked this post:
99 Black Bird T/A (03-10-2022)