PP LS6 style heads

Reply Subscribe

Thread Tools

Search this Thread

Jul 23, 2004 | 09:44 AM

HAMRHEAD

Thread Starter

10 Second Club

iTrader: (8)

Joined: Feb 2004

Posts: 2,846

Likes: 0

From: Milwaukee, WI

PP LS6 style heads

Does anyone know or have any opinions on what cam would work best for these heads? Since it's better to match a cam with the heads for best performance. This would be for an A4 as well with all bolt ons.

Jul 23, 2004 | 10:50 AM

CHRISPY

TECH Senior Member

Joined: Nov 2001

Posts: 10,341

Likes: 1

Talk to the guys at Texas Speed or PM/email Terry from PP.

Jul 23, 2004 | 11:08 AM

WS6snake-eater

TECH Fanatic

Joined: Mar 2003

Posts: 1,839

Likes: 0

From: La Porte, TX

The TSP 231/237 is a proven combo that works well...Also their Magic stick, has been producing good #'s. Personally I'm running a G5X-3 and putting up real good numbers with the heads. 448rwhp through A4 with a PYE 3600 converter and ET streets only running 26PSI...Any of the 3 cams that I mentioned should yield some good results. However all 3 cams also need a large converter. I have since upgraded my 3600 to a 4200, and it made a world of difference. Also I would suggest some shorter gearing also.

Jul 23, 2004 | 11:31 AM

HAMRHEAD

Thread Starter

10 Second Club

iTrader: (8)

Joined: Feb 2004

Posts: 2,846

Likes: 0

From: Milwaukee, WI

I was thinking of those cams but was also told a 232/240 112 would work good. Or would this be almost to big?

Jul 23, 2004 | 12:31 PM

goober35

TECH Fanatic

iTrader: (1)

Joined: May 2003

Posts: 1,387

Likes: 0

From: St Clairsville, Oh

What do you think is to big. Is it you DD or the weekend car. With that size cam it might run into P/C problems

Jul 23, 2004 | 12:39 PM

HAMRHEAD

Thread Starter

10 Second Club

iTrader: (8)

Joined: Feb 2004

Posts: 2,846

Likes: 0

From: Milwaukee, WI

Too big is having to flycut pistons. It is a weekend car but may be driven a little during the week. In summer that is.

Jul 23, 2004 | 02:48 PM

Noyzee

8 second mod

iTrader: (37)

Joined: Nov 2002

Posts: 17,879

Likes: 1

From: East Side Performance! mASShole

my cam is high 240's and lower 600's and i drive it on the street and the weekend, and it is ok, not the best but ok. Little big for NA power, but good for the N2O
That is with cnc and hand PP LS6 heads.
I would say in the area of 230-234 236-240 and 581-590 on a 112-113
JMO, But that is the ball park id be looking.