When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hey guys I know this probably the longest shot ever but I'm curious if there is a throttle body angle corrector for Icon 102mm TB's?? So I've got a BTR Trinity intake with an Icon 102mm TB and I also have a motion raceworks quick seal attachment with 3" weld flange for the throttle body but the thing is that I cant even get the adapter on because of the downward angle of the intake that basically crashes right into the water pump pulley. If there was such a thing to correct that angle then it's problem solved. I've tried looking on the interwebs but maybe I'm not wording it right?? IDK are they even a real thing or is that gonna be some kind of custom one off piece?? Thanks guys have fun. I want to change the intake piping and be gone of those silicone couplers using the motion raceworks setup
Conduit
*Edit*
I thought you were just looking to get up and running. I didn’t realize you were using silicon hoses until I posted about the couplers. The plastic stuff might not look any better than what you have now but it’d be more rigid I guess.
Last edited by Y2K_Frenzy; May 31, 2024 at 07:39 PM.
Conduit
*Edit*
I thought you were just looking to get up and running. I didn’t realize you were using silicon hoses until I posted about the couplers. The plastic stuff might not look any better than what you have now but it’d be more rigid I guess.
I want to use this stuff in the pic to clean things up a bit. The throttle body is a modular design so the standard 4" hose barb on currently will come off and be replaced with the quick seal weld flange and the pie cuts are to bring it all together if that makes any sense. But I can't physically get that thing on as it crashes right into the water pump
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Slideshow: The controversial Ferrari F6 swaps its original flat-12 for a Corvette Z06-derived LT4 V8 and sends power to four rear wheels through a custom-built drivetrain.
7 Most Reliable High-Performance Engines GM Has Ever Built
Slideshow:These GM engines didn't just make huge power, they survived abuse, boost, track days, and six-digit mileage with a reputation for refusing to quit.
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Slideshow: From wobbling harmonic balancers to failed EBCMs, these are the issues that define long-term C5 ownership and what repairs typically involve.
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Slideshow: A modern Camaro transformed into a retro icon, this limited-run "Bandit" build blends nostalgia with brute force in a way few revivals manage.
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Slideshow: Cadillac didn't just crash the high-performance luxury vehicle party, it showed up loud, supercharged, and occasionally a little unhinged...
Throttle Body Angle corrector?? 
