G5X-2 Results for an A4
I'm interested in this cam, but my heads are milled .030. I'm a bit concerned about notching the pistons due to reliability concerns.
Also - the double springs, mandatory?
and NO I don't like powerdyne
<small>[ March 30, 2003, 08:15 PM: Message edited by: CamaroSS_2002 ]</small>
We have most of the cars set at 950, just to get the idle quality smooth.
Later,
Lou Gigliotti LGM
<strong> We idle these packages between 950 and 1050rpms. The only time the idle goes up is for AC and cold starts. That is very normal.
We have most of the cars set at 950, just to get the idle quality smooth.
Later,
Lou Gigliotti LGM </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Does that go for the A4 as well?
<strong> We idle these packages between 950 and 1050rpms. The only time the idle goes up is for AC and cold starts. That is very normal.
We have most of the cars set at 950, just to get the idle quality smooth.
Later,
Lou Gigliotti LGM </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">That would probably explain the higher idle. My AC was never off since I picked the car up. Gotta love texas! <img border="0" title="" alt="[Razz]" src="gr_images/icons/tongue.gif" /> Thanks lou!
The Best V8 Stories One Small Block at Time
With my F1 I have a 900rpm idle cause I wanted idle as smooth as possible and a 1000rpm idle with AC on.
<img border="0" alt="[driving]" title="" src="graemlins/gr_driving3.gif" />
<small>[ March 31, 2003, 11:23 AM: Message edited by: CamaroSS_2002 ]</small>





