are rocker ars needed???
not needed, per se, but if you have the money, then go for it. my motor has 62k miles on it, and i'm replacing my rocker arms. i'm also puttin in a 231/237 at the same time, so its cheap insurance. along with double springs, and hardened pushrods, and ls6 ported oil pump, etc.
TECH Senior Member
Joined: Mar 2004
Posts: 14,620
Likes: 17
From: BFE
No not needed. There is even talk of a new cure for stock rockers spilt bearing issues. It's being worked out by Nasty Performance and Harland sharp.
Stock rockers, new trunion, bearings and get this a C clip to prevent bearing cap from comming loose.
Stock rockers, new trunion, bearings and get this a C clip to prevent bearing cap from comming loose.
11 Second Club
Joined: Aug 2004
Posts: 254
Likes: 0
From: Liberty SC
Originally Posted by cyphur_traq
LOL who are you talking to? Me? Yea I have 1.7 ratio YT's sittin on my dresser waitin for the install.
NO not talking to you , talking to the guy who started this thread, who asked about if he needed rocker arms
Originally Posted by SLVRZLS1
NO not talking to you , talking to the guy who started this thread, who asked about if he needed rocker arms
P-Z I saw that thread...they have any price estimate yet? Wish they had come out with that 3 weeks ago, before I picked up a set of YT 1.7's. I got a great deal, but still. That will be a great route for people who do cam swaps in the future tho.
