HP rating:need help
Thread Starter
Launching!
Joined: Apr 2004
Posts: 227
Likes: 0
From: Stationed in Hawaii
HP rating:need help I was wondering if anyone might be able to help me out with a guess on HP rating on this set up
Stage 2 Heads (patriot performance or MTI stage 2 heads)
Comp cam xtreme energy cam
LS6 intake
80MM throttle body
MTI lid w/K&N filter
SS ram air hood
Program chip
pully kit
Hooker long tube headers w/y pipe
Magnaflow cat back exhaust
50 shot of NOS (wet shot)
hollowed out cats
TCI street fighter torque converter 3,000 stall
3.73 gears
F.A.S.T fuel system
Nitto 555R (275/40ZR17)
would that be enough for around 500 RWHP???? or should i also get a 383 Stroker kit
Stage 2 Heads (patriot performance or MTI stage 2 heads)
Comp cam xtreme energy cam
LS6 intake
80MM throttle body
MTI lid w/K&N filter
SS ram air hood
Program chip
pully kit
Hooker long tube headers w/y pipe
Magnaflow cat back exhaust
50 shot of NOS (wet shot)
hollowed out cats
TCI street fighter torque converter 3,000 stall
3.73 gears
F.A.S.T fuel system
Nitto 555R (275/40ZR17)
would that be enough for around 500 RWHP???? or should i also get a 383 Stroker kit
TECH Senior Member
Joined: Mar 2004
Posts: 14,620
Likes: 17
From: BFE
Originally Posted by StangKillaLS1
I was wondering if anyone might be able to help me out with a guess on HP rating on this set up
Stage 2 Heads (patriot performance or MTI stage 2 heads)
Comp cam xtreme energy cam (?? which one? TR 224/114lsa will do)
LS6 intake
80MM throttle body (just port original)
MTI lid w/K&N filter
SS ram air hood (just for show)
Program chip (LS1 require dyno tuning or Edit) no chips
pully kit
Hooker long tube headers w/y pipe
Magnaflow cat back exhaust
50 shot of NOS (wet shot) (you'll need a 100 at least)
hollowed out cats
TCI street fighter torque converter 3,000 stall (Higher stall 3500 min)
3.73 gears
F.A.S.T fuel system (Racetronix PnP+ 30 lbs SVO inj.)
Nitto 555R (275/40ZR17) (Good luck hooking)
would that be enough for around 500 RWHP???? or should i also get a 383 Stroker kit
Stage 2 Heads (patriot performance or MTI stage 2 heads)
Comp cam xtreme energy cam (?? which one? TR 224/114lsa will do)
LS6 intake
80MM throttle body (just port original)
MTI lid w/K&N filter
SS ram air hood (just for show)
Program chip (LS1 require dyno tuning or Edit) no chips
pully kit
Hooker long tube headers w/y pipe
Magnaflow cat back exhaust
50 shot of NOS (wet shot) (you'll need a 100 at least)
hollowed out cats
TCI street fighter torque converter 3,000 stall (Higher stall 3500 min)
3.73 gears
F.A.S.T fuel system (Racetronix PnP+ 30 lbs SVO inj.)
Nitto 555R (275/40ZR17) (Good luck hooking)
would that be enough for around 500 RWHP???? or should i also get a 383 Stroker kit
Just some corrections in red
i never see the point of these damn threads. install the **** and then dyno tune. every car is different and what you should dyno and what you [b]do[/d] dyno could be totally different.
